The first picture shows the rug as fully restored.

The second picture shows the wool used to reweave into the floral motifs of the rug.

The rug was repaired using the same wool and dye lots as the original rug.

The rug requires artisan work

The rug is valuable and any work will increase the value of the rug

The below shows the process to fix the rug

1. Inspection and Assessment
The restoration process at Jafri Rugs begins with a thorough inspection to evaluate the extent of damage. This includes identifying areas of wear, loose or unraveling threads, faded colors, and any holes or tears. Special care is taken to preserve the rug’s original design and the integrity of its stitching.

2. Pre-Restoration Cleaning
Before restoration work begins, the rug is carefully cleaned to remove accumulated dirt, dust, and stains. This ensures the restoration is performed on a clean surface and helps uncover areas that may require additional attention during the process.

3. Reweaving Damaged Sections
If the rug has missing or damaged stitches, skilled artisans meticulously reweave the affected areas. Original patterns and colors are closely matched so the repaired sections blend seamlessly with the rest of the rug, requiring a high level of craftsmanship.

4. Fringe and Edge Repair
The fringe of a rug often experiences wear over time. Frayed or missing fringe can be repaired or replaced by hand to match the original design and materials.
Additionally, rug edges that have begun to unravel are reinforced or re-bound through careful re-stitching or the use of similar materials to secure and protect the edges.

5. Dyeing and Color Restoration
Over time, exposure to sunlight, foot traffic, or improper cleaning can cause rug colors to fade. Restoration specialists use professional, colorfast dyes to restore the rug’s original hues.
Precise color matching is essential and is typically done by hand to ensure a seamless and natural appearance.

6. Final Inspection
Once all restoration work is complete, a final inspection is performed to ensure the rug has been fully restored. The rug is examined for any overlooked areas, color inconsistencies, or stitching issues before it is returned.

Jafri Rug restoration will do the following:

-Clean the rug first to soften up the fibers

-Cut the rug down

-Bind the rug to have the frame of the rug

Restoring a Persian Kerman is an art and is all done by hand.

Jafri Rug restoration will do the following:

1.Inspection and Identification: Jafri Rugs carefully inspected to assess the extent of the moth damage. This involves checking the front and back of the rug for signs of infestation.

• Moth Treatment: The rug would be treated to eliminate any remaining moths and eggs. This usually involves a deep fumigation process using eco-friendly chemicals or freezing the rug to kill any pests.
• Re-weaving or Repairing Damaged Areas: The affected areas would likely require Jafri’s weavers reweaving the entire field. The damaged wool would be carefully removed, and new wool fibers, typically dyed to match the original, would be woven into the affected areas to restore the rug's appearance.

2. Worn and Faded Areas of the rug

As an example the medallion is a central feature in Persian rugs, and significant wear or fading can take away from the rug’s beauty and value.

• Color Restoration: To restore the faded vegetable and chrome dyes, Jafri’s first class weavers dyeing techniques may be employed. This could involve carefully re-dyeing the  area using natural dyes or color-safe synthetic dyes. This process is done with precision to match the original hues and avoid dye bleeding.
• Reweaving/Restoration: If the medallion’s pattern is worn down to the point of damage, Jafri’s weavers had to reweave the intricate design. This involves painstakingly replicating the original design and colors.

3. Fringe and Binding Unraveling

The fringe and the binding are crucial for maintaining the structural integrity and aesthetic of the rug.

• Fringe Repair or Replacement: The unraveling fringe would need to be reattached or replaced, depending on the extent of the damage. Jafri’s weavers often restore the fringe by knotting it back into place using similar fibers (wool or silk, depending on the rug’s original material). If the fringe is too damaged, it might need to be completely replaced.
• Binding Reinforcement: The edges and binding would also be repaired. This could involve stitching new binding material (usually wool or cotton) onto the rug’s edges, followed by a careful reinforcement of the stitching to prevent further unraveling. A careful color match is essential to keep the aesthetic intact.

4. Wool Pilling

Pilling happens when fibers get tangled and form small balls of fuzz, which can occur naturally over time with wool rugs.

• Shaving the Rug: Pilling can be removed through a careful process of shaving. Special tools or razors designed for rugs are used to gently remove the pill without damaging the fibers underneath. The professional would carefully go over the rug to ensure the pilling is removed evenly, leaving the wool in good condition.
• Deep Cleaning: After shaving off the pilling, the rug would undergo a deep cleaning to remove any remaining loose fibers and dirt. This would also help restore the softness of the wool.

Additional Steps in the Restoration Process:

• Deep Cleaning: Once the repairs are done, the rug would be carefully cleaned using appropriate techniques for Persian rugs. This would likely involve hand-washing the rug with a gentle, wool-safe detergent to remove dirt, oils, and any debris, followed by rinsing and drying.
• Final Inspection: After repairs, the rug would undergo a final inspection to ensure that all issues (moth damage, wear, pilling, etc.) have been properly addressed. Any minor touch-ups or final adjustments would be made.

1. Inspection and Documentation

Jafri Rug examines:

• Tears, holes, and worn areas
• Loose or missing weft and warp threads
• Fringe damage
• Color fading or dye lot issues
• Structural weakness

2. Removing binding and fringe Prior to Cleaning

The rug is typically cleaned before field work restoration, but in the case of binding and fringe work both are removed prior to cleaning

• Dirt and grit are removed.
• Stains and contaminants are treated.
• Cleaning exposes all existing damage and shows any damage that the customer may not have known existed prior to cleaning

3. Stabilization

Weak or unraveling sections are secured to prevent further deterioration.

• Loose threads are anchored.
• Edges may be temporarily supported.

4. Warp Repair

The warp threads (the rug's structural foundation) are repaired if broken.

• Missing warps are recreated.
• New foundation threads are inserted and tensioned to match the original weave.

5. Weft Reconstruction

The weft threads that create the design are rewoven.

• Matching wool, cotton, or other fibers are selected.
• Colors are matched as closely as possible.
• Traditional weaving techniques are used to recreate patterns.

6. Hole and Tear Reweaving

For holes and tears:

• Damaged fibers are removed.
• The area is rewoven thread by thread.
• Patterns are reconstructed to blend with surrounding sections.

7. Edge and Selvage Repair

The side edges (selvages) are reinforced.

• Frayed edges are rewoven or wrapped.
• New edge bindings may be added if necessary.

8. Fringe Restoration

If the fringe is damaged:

• Existing fringe is secured.
• Missing fringe may be reconstructed.
• The repair is designed to match the original style.

9. Blocking and Reshaping

Many older Kilims become distorted over time.

• The rug is carefully stretched and aligned.
• Dimensions are corrected where possible.
• The rug is dried under controlled tension.

10. Final Finishing

The repaired area is inspected for:

• Structural integrity
• Pattern accuracy
• Color consistency
• Overall appearance

Common Kilim Repairs

• Small tears and splits
• Hole reweaving
• Fringe replacement
• Edge reinforcement
• Moth damage restoration
• Pet damage repair
• Full panel reconstruction

Important Consideration

For collectible or antique Persian rugs such as this, Jafri Rugs often aims for stabilization and preservation and the artistry is that the rug should not look like there was any repair work done to the rug and the antiquity of the rug was maintained. This approach helps maintain the rug's historical integrity and value.

Typical repair costs vary widely depending on the amount of hand reweaving required. A small tear may take a few hours, while a large patterned hole can require many days of artisan weaving work.