Oriental & Area Rug Cleaning and Repair in Deerfield

Repairing a woven Turkish kilim requires preserving the original weave, colors, and structure. The exact process varies depending on the damage, Jafri's restoration typically follows these steps:

1. Inspection and Documentation
   • Identify fiber type (usually wool on wool or wool on cotton).
   • Assess damage such as holes, moth damage, worn areas, tears, broken selvages, or fringe loss.
   • Photograph the rug before work begins and determine whether repairs should be structural, cosmetic, or both.
2. Dusting and Washing
   • Remove embedded dust and grit.
   • Hand wash the kilim using fiber-safe detergents.
   • Dry the rug flat under controlled conditions. Repairing a dirty rug can lock debris into the weave and accelerate wear.
3. Stabilization
   • Secure weak edges or tears to prevent additional unraveling during restoration.
   • Reinforce loose wefts or warps before reconstruction begins.
4. Reweaving
   • Match the original wool, yarn thickness, twist, and dye colors as closely as possible.
   • Recreate the missing warp and weft structure.
   • Hand-weave replacement sections following the original weaving technique and pattern.
5. Selvage and Edge Repair
   • Rebuild damaged side cords if needed.
   • Rewrap or reinforce the selvages to restore strength and prevent future fraying.
6. Fringe Restoration
   • Replace or reconstruct damaged fringe if it is structurally important.
   • Secure the fringe to the rug's foundation using traditional techniques.
7. Blocking and Reshaping
   • Square the rug if it has become distorted.
   • Adjust tension so the kilim lies flat without ripples.
8. Final Inspection
   • Check weave consistency and structural integrity.
   • Trim any excess fibers and ensure the repaired area blends naturally with the original rug.

For valuable or antique Turkish kilims, Jafri generally aims for conservation-quality repairs, preserving as much original material as possible rather than replacing large sections unnecessarily. Color matching, yarn selection, and weave replication are key to maintaining both the rug's appearance and value.

The complexity of the repair depends on the extent of the damage. Small moth holes may take a few hours, while reconstructing large missing sections or intricate geometric motifs can require dozens of hours of hand weaving.

This rug was a massive undertaking as it required adding new wool into the rug. The new fringes were done via implant work and were not sewn on. The rug has increased greatly in value and will be preserved for a long time.

This rug also required the appropriate fringe work that is a propos to the design and era of the rug.

1. Inspection and Assessment

• The
  first step in Jafri Rugs restoration is a detailed inspection to assess
  the extent of the damage. This includes evaluating areas of wear,
  unraveling threads, fading colors, and any holes or tears in the rug.
  Special attention is given to preserving the original design and integrity
  of the stitching.

2. Cleaning Before Restoration

• Before
  any restoration work begins, the rug must be cleaned thoroughly. Cleaning
  ensures that any accumulated dirt or stains are removed so that the
  restoration work can be done on a clean surface. This also helps identify
  areas that may require special attention during the restoration process.

3. Reweaving Damaged Sections

• Reweaving:
  If the rug has areas of missing or damaged stitches, skilled artisans can
  reweave the missing sections, matching the original patterns and colors as
  closely as possible. This requires a high level of expertise to ensure the
  new stitches blend seamlessly with the rest of the rug.

4. Fringe and Edge Repair

• The
  fringe of a rug is often subjected to wear over time. If the fringe is
  frayed or missing, it can be reattached or replaced by hand, ensuring that
  it matches the original design and material.


• The
  edges of the rug may also need reinforcing or re-binding if they have
  started to unravel. This can be done by re-stitching or using a similar
  material to secure the edges.

5. Dyeing and Color Restoration

• Color
  Fading: Over time, the dyes in a needlepoint rug may fade due to
  exposure to sunlight, wear, or improper cleaning. Skilled restoration
  experts can re-dye the affected areas using professional, colorfast dyes
  to restore the rug’s original hues.


• Matching
  Colors: When dyeing a rug, it’s critical to match the colors exactly
  to ensure that the restoration is seamless. This process is usually done
  by hand to ensure accuracy.

6. Final Inspection

• Once
  all the restoration work is completed, a final inspection is conducted to
  ensure the rug is restored to its original condition. The rug is checked
  for any missed areas, color inconsistencies, or stitching issues that may
  need to be addressed before it’s returned.

The first image shows how this circa 1900 hand knotted Kerman rug has been left in a very poor condition. This rug requires enormous attention to the following areas:

-Reweaving worn areas where warp and weft is showing

-Refringing as the fringe is torn off

-Rebinding as the binding is unraveling

-Vegetable dyes are fading

-Field of the rug is also showing unevenness in the wool pile

-Stains due to water damage and wool that is destroyed

Jafri Rugs did not perform any repair work on this rug, the second image shows cleaning and color restoration work