Oriental & Area Rug Cleaning and Repair in Williamsburg, NY

Prior to cleaning the rug, Jafri Rugs does the following:

• Measure Rug size (e.g., 5×8, 8×10, runner)
• Confirm approximate age of the rug to confirm overall value of the rug
• Determine whether the rug has stains, pet odors, or fringe damage

1. Pre-Inspection

The rug is examined for:

• Fiber type (wool, cotton, mixed materials)
• Dye stability and colorfastness
• Stains, odors, pet contamination, or mold
• Existing damage such as worn areas, holes, or fringe issues

2. Dust Removal

Before any water is used, technicians remove embedded dry soil, sand, and grit.

• Commercial dusting equipment, compressed air, or vibration systems will be used to suck out all the toxins
• This step is critical because dry soil can damage fibers during washing.

3. Pre-Treatment

Specific stains and heavily soiled areas are treated.

• Pet urine, food stains, and odor sources receive targeted treatment.
• Cleaning agents are selected to be safe for wool and natural dyes.

4. Dye Testing

Jafri technicians test colors to ensure dyes won't bleed during washing.

• Handmade
• rugs often contain natural or vegetable dyes that require special care.

5. Full Immersion or Controlled Washing

The rug is washed using water and wool-safe cleaning solutions.

• Gentle agitation loosens dirt from deep within the pile.
• Harsh chemicals, bleach, and excessive heat are avoided.
• The washing method varies depending on the rug's construction and condition.

6. Thorough Rinsing

The rug is rinsed multiple times to remove:

• Soil and contaminants
• Cleaning residues
• Odors and allergens

Proper rinsing helps prevent residue buildup that can attract dirt later.

7. Water Extraction

Excess moisture is removed using specialized equipment.

• Centrifugal extractors or controlled wringing systems may be used.
• This reduces drying time and helps prevent mildew.

8. Controlled Drying

The rug is dried in a temperature-controlled environment.

• Air movers and dehumidifiers may be used.
• Direct heat and prolonged sun exposure are generally avoided to protect fibers and dyes.

9. Grooming and Finishing

After drying:

• The pile is brushed or groomed.
• Fringe is cleaned and straightened.
• Final touch-ups and inspections are performed.

10. Final Inspection

The cleaner verifies:

• Stains and odors have been addressed
• Colors remain stable
• The rug is fully dry
• No damage occurred during cleaning

Typical Rug Cleaning Frequency

• Every 1–3 years for most Persian rugs.
• More often if the rug is in a high-traffic area, has pets, or experiences frequent spills.

For valuable handmade Persian rugs (such as a Sarouk, Kashan, Mashad, Khoum, and Tabriz), Jafri Rugs always recommends specialty immersion rug cleaning over standard in-home carpet cleaning because it removes embedded soil while minimizing risk to the wool and dyes.

The rug is now fully repaired and the field is rewoven

The colors are now coming thru based on the original condition

Restoring a woven kilim rug is a delicate process that requires understanding the rug’s structure, materials, and traditional weaving techniques. Kilims are flat-weave rugs, typically made from wool (and sometimes cotton), and have no pile. Restoration focuses on preserving the rug's authenticity while repairing damage such as holes, frayed edges, or faded colors.     

Repairing a torn Moroccan kilim professionally usually means stabilizing the structure first, then reweaving the damaged section so the repair becomes part of the original weave rather than a patch placed on top.

1. Inspection and stabilization

Jafri Oriental Weavers confirm the following:

• Whether warp threads are broken
• Dye stability 
• Wool condition and dry rot
• Edge/fringe weakness

Loose wool fibers and threads are secured before cleaning.

2. Cleaning before repair due to:

• Existing dirt digs into the fibers
• Exposes existing damage 
• Hidden damage becomes visible

Hand washing is preferred for kilims.

3. Rebuilding the foundation

If the vertical warp threads are broken, new warp threads are inserted and tensioned.

This is the structural foundation of the rug.

4. Reweaving the torn area

The repairer:

• Matches wool type and thickness
• Matches colors and dye tones
• Recreates the original weave pattern by hand

For geometric Turkish kilims, this can require careful pattern reconstruction.

5. Edge and fringe repair

If the tear reaches the binding:

• Selvage edges may be rebound
• Fringe may be reconstructed
• Weak sections reinforced

6. Blocking and finishing

The rug is stretched back into shape and dried flat so it lies evenly.

The second image shows the post-restoration work

The Jafri Oriental Rugs Reweaving Process is a meticulous restoration technique used to repair handmade Persian, Oriental, antique, wool, and silk rugs that have suffered damage from wear, holes, tears, moths, or fire. The goal is to restore the rug while preserving its original design, structure, and value.

1. Comprehensive Inspection

Every rug begins with a detailed assessment where technicians examine:

• Hole and tear locations
• Missing pile or knots
• Loose or unraveling edges
• Fiber type (wool, silk, or cotton)
• Knot style and density
• Dye colors and overall condition

This inspection determines the best restoration method while protecting the rug's authenticity.

2. Professional Cleaning

Before reweaving begins, the rug is thoroughly hand washed to remove dirt, dust, and oils that can interfere with repairs. Cleaning also reveals hidden damage that may require restoration.

3. Foundation Reconstruction

If the rug's foundation has been damaged:

• Broken warp threads are replaced.
• Missing weft threads are reconstructed.
• The rug's structural integrity is restored before any decorative work begins.

This step provides the framework needed for long-lasting repairs.

4. Hand Reweaving

Experienced artisans carefully recreate the damaged area by:

• Matching the original knot type (Persian or Turkish)
• Matching knot density
• Using wool or silk that closely matches the original fibers
• Reproducing intricate borders, floral motifs, medallions, and other patterns knot by knot

The objective is to make the repair blend as seamlessly as possible with the surrounding design.

5. Color Matching and Restoration

When necessary, restoration specialists:

• Match original vegetable or chrome dye colors
• Hand-dye replacement fibers when required
• Blend repaired areas with the existing rug to maintain a consistent appearance

Color restoration is performed carefully to preserve the rug's original character while minimizing visible repairs.

6. Fringe and Edge Restoration

If damage extends to the rug's ends:

• Missing or worn fringe is repaired or replaced.
• Side bindings are reinforced or rebuilt.
• Rug edges are secured to prevent future unraveling.

These repairs improve both the rug's appearance and its structural stability.

7. Shearing and Grooming

Once reweaving is complete:

• The repaired pile is trimmed to match the surrounding height.
• Fibers are brushed in the natural pile direction.
• The repaired area is blended for a consistent texture and finish.

8. Final Inspection

Before returning the rug, technicians verify:

• Accurate pattern reproduction
• Secure knots and foundation
• Proper color matching
• Smooth, even pile height
• Overall craftsmanship and structural integrity

The finished rug is carefully inspected to ensure the restoration meets professional quality standards.

Reweaving is one of the most specialized forms of rug restoration. By rebuilding damaged areas knot by knot using matching materials and traditional weaving techniques, Jafri Oriental Rugs aims to preserve the beauty, durability, and value of handmade Persian and Oriental rugs while extending their usable life.

Repairing a woven Turkish kilim requires preserving the original weave, colors, and structure. The exact process varies depending on the damage, Jafri's restoration typically follows these steps:

1. Inspection and Documentation
   • Identify fiber type (usually wool on wool or wool on cotton).
   • Assess damage such as holes, moth damage, worn areas, tears, broken selvages, or fringe loss.
   • Photograph the rug before work begins and determine whether repairs should be structural, cosmetic, or both.
2. Dusting and Washing
   • Remove embedded dust and grit.
   • Hand wash the kilim using fiber-safe detergents.
   • Dry the rug flat under controlled conditions. Repairing a dirty rug can lock debris into the weave and accelerate wear.
3. Stabilization
   • Secure weak edges or tears to prevent additional unraveling during restoration.
   • Reinforce loose wefts or warps before reconstruction begins.
4. Reweaving
   • Match the original wool, yarn thickness, twist, and dye colors as closely as possible.
   • Recreate the missing warp and weft structure.
   • Hand-weave replacement sections following the original weaving technique and pattern.
5. Selvage and Edge Repair
   • Rebuild damaged side cords if needed.
   • Rewrap or reinforce the selvages to restore strength and prevent future fraying.
6. Fringe Restoration
   • Replace or reconstruct damaged fringe if it is structurally important.
   • Secure the fringe to the rug's foundation using traditional techniques.
7. Blocking and Reshaping
   • Square the rug if it has become distorted.
   • Adjust tension so the kilim lies flat without ripples.
8. Final Inspection
   • Check weave consistency and structural integrity.
   • Trim any excess fibers and ensure the repaired area blends naturally with the original rug.

For valuable or antique Turkish kilims, Jafri generally aims for conservation-quality repairs, preserving as much original material as possible rather than replacing large sections unnecessarily. Color matching, yarn selection, and weave replication are key to maintaining both the rug's appearance and value.

The complexity of the repair depends on the extent of the damage. Small moth holes may take a few hours, while reconstructing large missing sections or intricate geometric motifs can require dozens of hours of hand weaving.

Jafri Rugs follows a specialized, multi-step process for cleaning and restoring handmade Oriental, Persian, wool, silk, and antique rugs. Their approach is designed to remove embedded soil while protecting delicate fibers, dyes, and the rug's structure.

Jafri Rugs Cleaning Process

1. Inspection & Evaluation
   • Examine the rug's fibers, weave, dyes, and condition.
   • Identify stains, odors, pet damage, moth damage, water damage, and structural issues.
   • Determine the safest cleaning method for the specific rug.
2. Dust Removal
   • Use specialized dust-removal equipment to eliminate deeply embedded dirt and grit before washing.
   • This helps prevent fiber abrasion during the cleaning process.
3. Pre-Treatment
   • Apply customized treatments for stains, pet urine, and odors.
   • Tailor the cleaning approach to the rug's fiber type and condition.
4. Soaking
   • Immerse the rug when appropriate to loosen dirt, stains, and contaminants.
   • Particularly stubborn stains or odors may require multiple soaking cycles.
   • Silk, antique, moth-damaged, and water-damaged rugs receive individualized treatment.
5. Hand Washing
   • Wash both sides of the rug using vegetable-based soaps and fiber-safe shampoos.
   • Thoroughly rinse to remove all cleaning residues.
6. Luster Wash (When Appropriate)
   • Apply a finishing wash designed to enhance the rug's appearance and restore vibrancy.
7. Brushing & Grooming
   • Groom the pile with specialized brushes to align the fibers and restore texture.
8. Controlled Drying
   • Dry rugs in a climate-controlled environment to help prevent shrinkage, mildew, and dye migration.
9. Final Inspection
   • Inspect each rug after cleaning and repeat any necessary steps to meet quality standards before returning it to the customer.

Jafri Rugs Repair & Restoration Process

For rugs needing restoration, Jafri describes a repair workflow that generally includes:

• Pre-repair cleaning to remove dirt and oils.
• Detailed damage assessment.
• Hand reweaving of missing or damaged sections using traditional knotting techniques.
• Fringe replacement or repair with matching materials.
• Edge binding and overcasting to prevent unraveling.
• Color restoration using carefully matched dyes when needed.
• Moth damage treatment before reconstruction.
• Final cleaning, grooming, and inspection to ensure repairs blend naturally with the original rug.

They also offer free pickup and delivery throughout much of New York and New England, making it easier to have valuable rugs professionally cleaned and restored.

The rug has been fixed following enormous precision and attention to detail for the reweaving of the floral motifs. The artistry comes with maintaining the antiquity of the rug by using the same wool and vegetable dyes.

Refer to picture 3 for the post-restoration work

The first image shows the rug in very poor condition with fringe and binding work required as it was fraying. The second image shows how this Persian Shiraz rug has been restored to its original condition with fringe and binding that comports to the design and era such as adding tea stained fringe implants to the rug as that was the proper fringe that was of that circa 1900 period. Additionally Jafri Rug restoration sheared this rug to even out the wool on the pile of the rug and added binding that prevents the wool from unraveling any further into the field of the rug and Jafri Rug restoration did the following work:

-Reweaving worn areas where warp and weft is showing

-Refringing as the fringe is torn off

-Rebinding as the binding is unraveling

-Vegetable dyes are fading

-Field of the rug is also showing unevenness in the wool pile

Given the age and value of the rug, this is a rug that should not be sent to any rug store, but should go to Jafri Rug restoration as the weavers are specifically skilled to repair these threadbare rugs and understand the motifs and match the wool dye lot for dye lot. The artistry will maintain the antiquity of the rug and will not make it look newly made and will also raise the value of the rug.

Jafri Rug restoration fixed the rug by doing the following:

1. Assessment and Inspection:

Condition Check: Inspect the rug thoroughly for signs of wear, including fraying edges, missing or damaged knots, stains, or fading. This is essential to assess the scope of restoration work needed.

Fabric Type: Identify the materials used (wool, silk, etc.) to ensure the correct restoration techniques and materials are used.

Color Matching: Persian rugs often feature vibrant and intricate color schemes. Color matching is important for any repairs to ensure the restoration blends seamlessly with the original.

2. Cleaning:

Gentle Cleaning: Before restoration, the rug is cleaned to remove dirt and stains. This is typically done by hand or machine using organic olive oil shampoo foam to cleanse the rug and techniques that preserve the integrity of the fibers.

Drying: After cleaning, the rug must be carefully dried to prevent any damage or shrinkage.

3. Repairing Damaged Areas:

Reweaving/Knots: If there are missing or damaged knots, the missing sections will be re-woven by hand. Skilled weavers use the same knotting technique that was used in the original rug to ensure consistency.

Fringe Repair: If the fringe is damaged or missing, it can be reattached or replaced using matching fibers.

Edge Repair: The rug's edges may become frayed over time. A repair may involve re-binding the edges to prevent further unraveling.

4. Color Restoration:

If the rug has areas with faded or discolored sections, dyes matching the original colors may be applied to restore the vibrancy. This requires careful attention to detail to blend the colors seamlessly.