Oriental Area Rug Cleaning and Antique Rug Repair, and Color Restoration in Fishkill, New York

Jafri Oriental Rugs restored this rug by doing the following:

1. Inspection and Identification

• Rug origin and weaving style such as warp and weft
• Fiber type (wool, silk, cotton, camel hair)
• Natural vs. synthetic dyes
• Age and wear patterns
• Existing damage:
  • Fraying of fringe
  • Holes for the wool replacement
  • Dry rot
  • Moth damage
  • Color bleeding
  • Water damage

Antique rugs often require dye-stability testing before any moisture is introduced.

2. Dusting and Dry Soil Removal

Before washing, deep dry soil is removed.

• Rug dusting machines
• Gentle compressed air
• Soft beating/vibration systems
• Hand brushing

This step is critical because antique rugs can hold pounds of embedded grit that cuts fibers over time.

3. Dye Testing

Technicians test every major color area for bleeding risk.

Especially vulnerable:

• Reds
• Dark blues
• Blacks made with iron compounds

If dyes are unstable, cleaners may:

• Lower water temperature
• Adjust pH
• Use moisture-controlled cleaning
• Apply dye stabilizers

4. Hand Washing

Antique Persian rugs are usually hand-washed flat on a wash floor.

Typical process:

1. Pre-soak (if safe)
2. Gentle wool-safe shampoo application
3. Soft brushing with the pile direction
4. Thorough rinsing
5. Fringe cleaning by hand

Harsh steam cleaning is generally avoided because it can:

• Damage lanolin in wool
• Cause shrinkage
• Distort the foundation
• Trigger dye migration

5. Water Extraction and Drying

Excess water is carefully removed using:

• Centrifuge wringers
• Compression rollers
• Controlled extraction systems

Then the rug is dried in a climate-controlled room with:

• Air circulation
• Dehumidification
• Temperature monitoring

Proper drying prevents:

• Mildew
• Browning
• Fiber weakening

For the repair work Jafri Rugs will do the following:

Fringe Repair

Jafri Rugs will add new fringe implants to the rug

The side edges are reinforced to stop unraveling.

Hole and Tear Restoration

Color Restoration

When fading or bleaching occurs:

• Vegetable-dye matching may be performed
• Small areas are color-corrected by hand

Given the age and value of the rug, this is a rug that
should not be sent to any rug store, but should go to Jafri Rug restoration as
the weavers are specifically skilled to repair these threadbare rugs and
understand the motifs and match the wool dye lot for dye lot. The artistry will
maintain the antiquity of the rug and will not make it look newly made and will
also raise the value of the rug.

Jafri Rug restoration will do the following:

1. Assessment and Inspection:

Condition Check: Inspect the rug thoroughly for signs of
wear, including fraying edges, missing or damaged knots, stains, or fading.
This is essential to assess the scope of restoration work needed.

Fabric Type: Identify the materials used (wool, silk, etc.)
to ensure the correct restoration techniques and materials are used.

Color Matching: Persian rugs often feature vibrant and
intricate color schemes. Color matching is important for any repairs to ensure
the restoration blends seamlessly with the original.

2. Cleaning:

Gentle Cleaning: Before restoration, the rug is cleaned to
remove dirt and stains. This is typically done by hand or machine using organic
olive oil shampoo foam to cleanse the rug and techniques that preserve the
integrity of the fibers.

Drying: After cleaning, the rug must be carefully dried to
prevent any damage or shrinkage.

3. Repairing Damaged Areas:

Reweaving/Knots: If there are missing or damaged knots, the
missing sections will be re-woven by hand. Skilled weavers use the same
knotting technique that was used in the original rug to ensure consistency.

Fringe Repair: If the fringe is damaged or missing, it can
be reattached or replaced using matching fibers.

Edge Repair: The rug’s edges may become frayed over time. A
repair may involve re-binding the edges to prevent further unraveling.

4. Color Restoration:

If the rug has areas with faded or discolored sections, dyes
matching the original colors may be applied to restore the vibrancy. This
requires careful attention to detail to blend the colors seamlessly.