Oriental & Area Rug Cleaning and Repair in Fayetteville

Jafri Rug restoration will do the following step by step:

1. Inspection & Documentation

• 
  

  Rug is inspected under strong lighting for:

  
  
  
  
  • 
    

    Damage (holes, tears, moth damage)

    
    
  
  
  • 
    

    Fiber content (wool, silk, cotton)

    
    
  
  
  • 
    

    Color stability (testing for dye bleeding)

    
    
  
  
  • 
    

    Odors (e.g. pet urine, mildew)

    
    
  
  
  
  


• 
  

  Measurements are recorded; before photos are taken.

  
  

2. Dry Soil Removal (Dusting)

• 
  

  Rug is flipped and vibrated or beaten using a rug dusting machine or compressed air.

  
  


• 
  

  This step removes up to 80% of dry dirt and sand embedded in the foundation.

  
  


• 
  

  Avoided by carpet steamers but critical for longevity.

  
  

🧠 Fact: Persian rugs can trap several pounds of grit, which can shred fibers if not dusted out before washing.

3. Colorfastness Testing

• 
  

  Specialists blot dyes with water and pH-neutral cleaning agents to check for bleeding.

  
  


• 
  

  If unstable, dye-locking agents are applied or rug is washed carefully in cold water.

  
  

4. Pre-Soaking / Odor Treatment

• 
  

  Rugs with pet urine or mildew are submerged in odor-neutralizing solutions.

  
  


• 
  

  Enzyme-based treatments may be used to break down organic stains before shampooing.

  
  

5. Hand Washing or Submersion Wash

• 
  

  Traditional Persian-style hand washing uses:

  
  
  
  
  • 
    

    Wool-safe, pH-balanced shampoo

    
    
  
  
  • 
    

    Gentle brushing following the nap of the pile

    
    
  
  
  • 
    

    Repeated rinsing with soft water

    
    
  
  
  
  


• 
  

  For extremely dirty rugs, the entire rug may be submerged and agitated in a wash pool.

  
  

🚫 Avoid high-pressure or in-home “steam cleaning”—it can cause shrinkage, color bleeding, or structural damage.

6. Rinsing & Water Extraction

• 
  

  Rinsed thoroughly using flowing water or soft spray wands.

  
  


• 
  

  Excess water is extracted via a centrifuge wringer or by rolling and pressing.

  
  

7. Drying

• 
  

  Rugs are hung in a climate-controlled room or flat-dried on drying beds with airflow.

  
  


• 
  

  Wool rugs may take 24–48 hours to fully dry.

Pre-Repair Cleaning

• A deep cleaning is performed before repairs to remove dirt, oils, and debris that interfere with repair work.
• Includes:
• Dusting (front and back)
• Gentle hand washing with pH-neutral detergents so as not to erode the fibers of the rug
• Rinsing and drying in a temperature-controlled environment

Structural Repairs

These are the most critical to maintain rug integrity:

a. Edge Repair (Overcasting or Binding)

• Rewrap or rebind fraying edges to prevent unraveling.
• Uses matching wool or cotton thread.
• Restores tension and keeps the weft and warp from separating.

b. Fringe Repair or Replacement

• Stabilizes or reconstructs the fringe (often the warp threads).
• May involve:
• Tying off loose fringe
• Sewing in new fringe sections
• Weaving new fringes into the foundation

c. Hole or Tear Repair

• Small holes: patched and reinforced from the back.
• Larger holes or tears: require reweaving the foundation (warp and weft), then tying new knots to match the original pattern.

4. Pile Reweaving / Pattern Reconstruction

• Rebuilds worn or missing areas by hand-knotting new wool or silk into the structure.
• Requires:
• Color-matching wool (often hand-dyed)
• Matching the knot density, knot type (Turkish or Persian), and pattern
• Done by experienced weavers to ensure seamless blending with the original design.

5. Color Restoration

• In areas where colors have faded or bled, restorers may:
• Touch up color with textile-safe dyes where there is already wool shown in the pile but requires blending of color for consistency in the rug’s colors
• Avoid painting, which can damage fibers over time

 6. Shearing & Grooming

• After repairs, the pile is carefully sheared to match surrounding areas.
• Helps ensure a consistent pile height and finish.
• Brushing aligns the nap and improves visual consistency.

 7. Blocking & Reshaping

• If the rug is warped or misshapen:
• It’s dampened and laid flat under weight or pinned.
• Dried under tension to restore its original shape and prevent buckling.

8. Final Cleaning & Inspection

• A final surface clean removes any dust or fibers from the repair.
• Inspection ensures:
• Seamless repairs
• Color and texture matches
• Edges are secure and the rug lies flat

Given the age and value of the rug, this is a rug that
should not be sent to any rug store, but should go to Jafri Rug restoration as
the weavers are specifically skilled to repair these threadbare rugs and
understand the motifs and match the wool dye lot for dye lot. The artistry will
maintain the antiquity of the rug and will not make it look newly made and will
also raise the value of the rug.

Pre-Repair Cleaning

• A deep cleaning is performed before repairs to remove dirt, oils, and debris that interfere with repair work.


• Includes:




• Dusting (front and back)


• Gentle hand washing with pH-neutral detergents so as not to erode the fibers of the rug


• Rinsing and drying in a temperature-controlled environment

 Structural Repairs

These are the most critical to maintain rug integrity:

a. Edge Repair (Overcasting or Binding)

• Rewrap or rebind fraying edges to prevent unraveling.


• Uses matching wool or cotton thread.


• Restores tension and keeps the weft and warp from separating.

b. Fringe Repair or Replacement

• Stabilizes or reconstructs the fringe (often the warp threads).


• May involve:


• Tying off loose fringe


• Sewing in new fringe sections


• Weaving new fringes into the foundation

c. Hole or Tear Repair

• Small holes: patched and reinforced from the back.


• Larger holes or tears: require reweaving the foundation (warp and weft), then tying new knots to match the original pattern.

 
4. Pile Reweaving / Pattern Reconstruction

• Rebuilds worn or missing areas by hand-knotting new wool or silk into the
  structure.


• Requires:


• Color-matching
  wool (often hand-dyed)


• Matching the knot density, knot type (Turkish or Persian), and pattern




• Done by experienced weavers to ensure seamless blending with the original design.

5. Color Restoration

• In areas where colors have faded or bled, restorers may:




• Touch up color with textile-safe dyes where there is already wool shown in the pile but requires blending of color for consistency in the rug’s colors


• Avoid painting, which can damage fibers over time

 6. Shearing &
Grooming

• After repairs, the pile is carefully sheared to match surrounding areas.


• Helps ensure a consistent pile height and finish.


• Brushing aligns the nap and improves visual consistency.

 7. Blocking &
Reshaping

• If the rug is warped or misshapen:




• It’s dampened and laid flat under weight or pinned.


• Dried under tension to restore its original shape and prevent buckling.

8. Final Cleaning & Inspection

• A final surface clean removes any dust or fibers from the repair.


• Inspection
  ensures:




• Seamless repairs


• Color and texture matches


• Edges are secure and the rug lies flat

Pre-Repair Cleaning

• A deep cleaning is performed before repairs to remove dirt, oils, and debris that interfere with repair work.
• Includes:
• Dusting (front and back)
• Gentle hand washing with pH-neutral detergents so as not to erode the fibers of the rug
• Rinsing and drying in a temperature-controlled environment

Structural Repairs

These are the most critical to maintain rug integrity:

a. Edge Repair (Overcasting or Binding)

• Rewrap or rebind fraying edges to prevent unraveling.
• Uses matching wool or cotton thread.
• Restores tension and keeps the weft and warp from separating.

b. Fringe Repair or Replacement

• Stabilizes or reconstructs the fringe (often the warp threads).
• May involve:
• Tying off loose fringe
• Sewing in new fringe sections
• Weaving new fringes into the foundation

c. Hole or Tear Repair

• Small holes: patched and reinforced from the back.
• Larger holes or tears: require reweaving the foundation (warp and weft), then tying new knots to match the original pattern.

4. Pile Reweaving / Pattern Reconstruction

• Rebuilds worn or missing areas by hand-knotting new wool or silk into the structure.
• Requires:
• Color-matching wool (often hand-dyed)
• Matching the knot density, knot type (Turkish or Persian), and pattern
• Done by experienced weavers to ensure seamless blending with the original design.

5. Color Restoration

• In areas where colors have faded or bled, restorers may:
• Touch up color with textile-safe dyes where there is already wool shown in the pile but requires blending of color for consistency in the rug’s colors
• Avoid painting, which can damage fibers over time

 6. Shearing & Grooming

• After repairs, the pile is carefully sheared to match surrounding areas.
• Helps ensure a consistent pile height and finish.
• Brushing aligns the nap and improves visual consistency.

 7. Blocking & Reshaping

• If the rug is warped or misshapen:
• It’s dampened and laid flat under weight or pinned.
• Dried under tension to restore its original shape and prevent buckling.

8. Final Cleaning & Inspection

• A final surface clean removes any dust or fibers from the repair.
• Inspection ensures:
• Seamless repairs
• Color and texture matches
• Edges are secure and the rug lies flat

Jafri Rug restoration will do the following:

1. Assessment and Inspection:

Condition Check: Inspect the rug thoroughly for signs of wear, including fraying edges, missing or damaged knots, stains, or fading. This is essential to assess the scope of restoration work needed.

Fabric Type: Identify the materials used (wool, silk, etc.) to ensure the correct restoration techniques and materials are used.

Color Matching: Persian rugs often feature vibrant and intricate color schemes. Color matching is important for any repairs to ensure the restoration blends seamlessly with the original.

2. Cleaning:

Gentle Cleaning: Before restoration, the rug is cleaned to remove dirt and stains. This is typically done by hand or machine using organic olive oil shampoo foam to cleanse the rug and techniques that preserve the integrity of the fibers.

Drying: After cleaning, the rug must be carefully dried to prevent any damage or shrinkage.

3. Repairing Damaged Areas:

Reweaving/Knots: If there are missing or damaged knots, the missing sections will be re-woven by hand. Skilled weavers use the same knotting technique that was used in the original rug to ensure consistency.

Fringe Repair: If the fringe is damaged or missing, it can be reattached or replaced using matching fibers.

Edge Repair: The rug’s edges may become frayed over time. A repair may involve re-binding the edges to prevent further unraveling.

4. Color Restoration:

If the rug has areas with faded or discolored sections, dyes matching the original colors may be applied to restore the vibrancy. This requires careful attention to detail to blend the colors seamlessly.           

Pre-Repair Cleaning

• A deep cleaning is performed before repairs to remove dirt, oils, and debris that interfere with repair work.
• Includes:
• Dusting (front and back)
• Gentle hand washing with pH-neutral detergents so as not to erode the fibers of the rug
• Rinsing and drying in a temperature-controlled environment

Structural Repairs

These are the most critical to maintain rug integrity:

a. Edge Repair (Overcasting or Binding)

• Rewrap or rebind fraying edges to prevent unraveling.
• Uses matching wool or cotton thread.
• Restores tension and keeps the weft and warp from separating.

b. Fringe Repair or Replacement

• Stabilizes or reconstructs the fringe (often the warp threads).
• May involve:
• Tying off loose fringe
• Sewing in new fringe sections
• Weaving new fringes into the foundation

c. Hole or Tear Repair

• Small holes: patched and reinforced from the back.
• Larger holes or tears: require reweaving the foundation (warp and weft), then tying new knots to match the original pattern.

4. Pile Reweaving / Pattern Reconstruction

• Rebuilds worn or missing areas by hand-knotting new wool or silk into the structure.
• Requires:
• Color-matching wool (often hand-dyed)
• Matching the knot density, knot type (Turkish or Persian), and pattern
• Done by experienced weavers to ensure seamless blending with the original design.

5. Color Restoration

• In areas where colors have faded or bled, restorers may:
• Touch up color with textile-safe dyes where there is already wool shown in the pile but requires blending of color for consistency in the rug’s colors
• Avoid painting, which can damage fibers over time

 6. Shearing & Grooming

• After repairs, the pile is carefully sheared to match surrounding areas.
• Helps ensure a consistent pile height and finish.
• Brushing aligns the nap and improves visual consistency.

 7. Blocking & Reshaping

• If the rug is warped or misshapen:
• It’s dampened and laid flat under weight or pinned.
• Dried under tension to restore its original shape and prevent buckling.

8. Final Cleaning & Inspection

• A final surface clean removes any dust or fibers from the repair.
• Inspection ensures:
• Seamless repairs
• Color and texture matches
• Edges are secure and the rug lies flat

1. Inspection and Assessment

• The first step in Jafri Rugs restoration is a detailed inspection to assess the extent of the damage. This includes evaluating areas of wear, unraveling threads, fading colors, and any holes or tears in the rug. Special attention is given to preserving the original design and integrity of the stitching.

2. Cleaning Before Restoration

• Before any restoration work begins, the rug must be cleaned thoroughly. Cleaning ensures that any accumulated dirt or stains are removed so that the restoration work can be done on a clean surface. This also helps identify areas that may require special attention during the restoration process.

3. Reweaving Damaged Sections

• Reweaving:If the rug has areas of missing or damaged stitches, skilled artisans can reweave the missing sections, matching the original patterns and colors as closely as possible. This requires a high level of expertise to ensure the new stitches blend seamlessly with the rest of the rug.

4. Fringe and Edge Repair

• The fringe of a rug is often subjected to wear over time. If the fringe is frayed or missing, it can be reattached or replaced by hand, ensuring that it matches the original design and material.
• The edges of the rug may also need reinforcing or re-binding if they have started to unravel. This can be done by re-stitching or using a similar material to secure the edges.

5. Dyeing and Color Restoration

• ColorFading:Over time, the dyes in a needlepoint rug may fade due to exposure to sunlight, wear, or improper cleaning. Skilled restoration experts can re-dye the affected areas using professional, colorfast dyes to restore the rug’s original hues.
• MatchingColors:When dyeing a rug, it’s critical to match the colors exactly to ensure that the restoration is seamless. This process is usually done by hand to ensure accuracy.

6. Final Inspection

• Once all the restoration work is completed, a final inspection is conducted to ensure the rug is restored to its original condition. The rug is checked for any missed areas, color inconsistencies, or stitching issues that may need to be addressed before it’s returned.

Jafri Rugs Persian and Oriental rug cleaning process is customized to the rug's fiber, age, dyes, and condition. The typical process includes:

1. Inspection & Pre-Treatment
   • Every rug is carefully inspected for wear, stains, colorfastness, fringe condition, and structural damage.
   • The appropriate cleaning method is selected based on the rug's construction and materials.
2. Deep Dust Removal
   • Dry soil, sand, and grit are removed using specialized dusting equipment before washing.
   • This step is essential because embedded dirt can damage fibers if left in the rug during cleaning.
3. Spot & Stain Treatment
   • Pet stains, food spills, odors, and other problem areas receive targeted pre-treatment using wool-safe cleaning solutions.
   • Delicate rugs receive customized treatment to protect dyes and fibers.
4. Hand Washing
   • Rugs are washed on both sides using gentle, fiber-safe shampoos and traditional hand-washing techniques.
   • Antique, Persian, Oriental, silk, and wool rugs receive specialized care to preserve their colors and texture.
5. Thorough Rinsing
   • The rug is completely rinsed to remove dirt, soap, and cleaning residues, helping maintain softness and preventing rapid re-soiling.
6. Water Extraction & Drying
   • A centrifugal extraction system removes most of the moisture.
   • Rugs are then dried in a climate-controlled environment to help prevent shrinkage, mildew, and color bleeding.
7. Brushing, Grooming & Protection
   • Fibers are brushed back into their natural direction.
   • Fringes are cleaned and groomed.
   • Protective treatments against mold, moths, and insects may be applied when appropriate.
8. Final Inspection & Delivery
   • Each rug undergoes a final quality inspection.
   • The rug is packaged and returned, with free pickup and delivery available in many service areas.

This process is designed to safely clean Persian, Oriental, wool, silk, antique, and handmade rugs while preserving their beauty and extending their lifespan.

The first image shows how this circa 1900 hand knotted Kerman rug has been left in a very poor condition. This rug requires enormous attention to the following areas:

-Reweaving worn areas where warp and weft is showing

-Refringing as the fringe is torn off

-Rebinding as the binding is unraveling

-Vegetable dyes are fading

-Field of the rug is also showing unevenness in the wool pile

-Stains due to water damage and wool that is destroyed

Jafri Rugs did not perform any repair work on this rug, the second image shows cleaning and color restoration work