Oriental & Area Rug Cleaning and Repair in Copake, NY

Prior to cleaning the rug, Jafri Rugs does the following:

• Measure Rug size (e.g., 5×8, 8×10, runner)
• Confirm approximate age of the rug to confirm overall value of the rug
• Determine whether the rug has stains, pet odors, or fringe damage

1. Pre-Inspection

The rug is examined for:

• Fiber type (wool, cotton, mixed materials)
• Dye stability and colorfastness
• Stains, odors, pet contamination, or mold
• Existing damage such as worn areas, holes, or fringe issues

2. Dust Removal

Before any water is used, technicians remove embedded dry soil, sand, and grit.

• Commercial dusting equipment, compressed air, or vibration systems will be used to suck out all the toxins
• This step is critical because dry soil can damage fibers during washing.

3. Pre-Treatment

Specific stains and heavily soiled areas are treated.

• Pet urine, food stains, and odor sources receive targeted treatment.
• Cleaning agents are selected to be safe for wool and natural dyes.

4. Dye Testing

Jafri technicians test colors to ensure dyes won't bleed during washing.

• Handmade
• rugs often contain natural or vegetable dyes that require special care.

5. Full Immersion or Controlled Washing

The rug is washed using water and wool-safe cleaning solutions.

• Gentle agitation loosens dirt from deep within the pile.
• Harsh chemicals, bleach, and excessive heat are avoided.
• The washing method varies depending on the rug's construction and condition.

6. Thorough Rinsing

The rug is rinsed multiple times to remove:

• Soil and contaminants
• Cleaning residues
• Odors and allergens

Proper rinsing helps prevent residue buildup that can attract dirt later.

7. Water Extraction

Excess moisture is removed using specialized equipment.

• Centrifugal extractors or controlled wringing systems may be used.
• This reduces drying time and helps prevent mildew.

8. Controlled Drying

The rug is dried in a temperature-controlled environment.

• Air movers and dehumidifiers may be used.
• Direct heat and prolonged sun exposure are generally avoided to protect fibers and dyes.

9. Grooming and Finishing

After drying:

• The pile is brushed or groomed.
• Fringe is cleaned and straightened.
• Final touch-ups and inspections are performed.

10. Final Inspection

The cleaner verifies:

• Stains and odors have been addressed
• Colors remain stable
• The rug is fully dry
• No damage occurred during cleaning

Typical Frequency

• Every 1–3 years for most Persian rugs.
• More often if the rug is in a high-traffic area, has pets, or experiences frequent spills.

For valuable handmade Persian rugs (such as a Sarouk, Kashan, Mashad, Khoum, and Tabriz), Jafri Rugs always recommends specialty immersion rug cleaning over standard in-home carpet cleaning because it removes embedded soil while minimizing risk to the wool and dyes.

1. Inspection

Examine the rug for:

• Holes or worn areas
• Broken warp threads (the lengthwise foundation threads)
• Missing weft threads (the widthwise woven threads)
• Frayed edges or ends
• Color fading or fiber deterioration

2. Rug Cleaning and Dusting

• Soak rug in tub of cold water and solution
• Remove dirt trapped in damaged sections.
• If heavily soiled, wash the rug appropriately and allow it to dry completely before repairs.

3. Stabilize the Rug

Secure the rug on a flat work surface or stretching frame.

• Align distorted areas.
• Straighten loose warp threads.
• Prevent additional unraveling while working.

4. Repair the Foundation and Warp and Weft

If warp threads are broken:

• Insert replacement warp yarns that closely match the original material (wool, cotton, or goat hair).
• Anchor the new warps into sound surrounding structure.
• Maintain the original spacing and tension.

This is often the most critical step because the entire weave depends on the warp foundation.

5. Reweave Missing Areas

For holes:

• Match the original yarn type, thickness, and color as closely as possible.
• Recreate the missing weft structure.
• Follow the original pattern row by row.
• Weave tightly enough to match surrounding density without causing puckering.

For valuable or antique kilims, restorers often hand-dye yarns to achieve accurate color matching.

6. Repair Binding

If side edges are frayed:

• Rebuild the binding (finished edge).
• Wrap and reinforce edge cords.
• Stitch loose sections securely.

Strong edges help prevent future unraveling.

7. Repair Fringes

If the rug ends are damaged:

• Secure loose wefts.
• Recreate original end bindings.
• Replace or reconstruct fringe if appropriate to the rug's design.

Sometimes conservation work leaves fringe incomplete intentionally to preserve authenticity.

8. Blend and Finish

After structural repairs:

• Shear any excess yarn.
• Adjust tension where necessary.
• Lightly groom fibers to blend repaired sections with the original weaving

Jafri Rugs will perform color restoration work on this rug which requires mixing vegetable dye lot and oil together and do touch up work on the work so that it blends in the wool

Jafri Rug restoration fixed this rug entirely and raised the value of the rug by doing the following:

1.Inspection and Identification: Jafri Rugs carefully inspected to assess the extent of the moth damage. This involves checking the front and back of the rug for signs of infestation.

·        Moth Treatment: The rug would be treated to eliminate any remaining moths and eggs. This usually involves a deep fumigation process using eco-friendly chemicals or freezing the rug to kill any pests.

·        Re-weaving or Repairing Damaged Areas: The affected areas would likely require Jafri’s weavers reweaving the entire field. The damaged wool would be carefully removed, and new wool fibers, typically dyed to match the original, would be woven into the affected areas to restore the rug's appearance.

2. Worn and Faded Areas of the rug

As an example the medallion is a central feature in Persian rugs, and significant wear or fading can take away from the rug’s beauty and value.

·        Color Restoration: To restore the faded vegetable and chrome dyes, Jafri’s first class weavers dyeing techniques may be employed. This could involve carefully re-dyeing the  area using natural dyes or color-safe synthetic dyes. This process is done with precision to match the original hues and avoid dye bleeding.

·        Reweaving/Restoration: If the medallion’s pattern is worn down to the point of damage, Jafri’s weavers had to reweave the intricate design. This involves painstakingly replicating the original design and colors.

3. Fringe and Binding Unraveling

The fringe and the binding are crucial for maintaining the structural integrity and aesthetic of the rug.

·        Fringe Repair or Replacement: The unraveling fringe would need to be reattached or replaced, depending on the extent of the damage. Jafri’s weavers often restore the fringe by knotting it back into place using similar fibers (wool or silk, depending on the rug’s original material). If the fringe is too damaged, it might need to be completely replaced.

·        Binding Reinforcement: The edges and binding would also be repaired. This could involve stitching new binding material (usually wool or cotton) onto the rug’s edges, followed by a careful reinforcement of the stitching to prevent further unraveling. A careful color match is essential to keep the aesthetic intact.

4. Wool Pilling

Pilling happens when fibers get tangled and form small balls of fuzz, which can occur naturally over time with wool rugs.

·        Shaving the Rug: Pilling can be removed through a careful process of shaving. Special tools or razors designed for rugs are used to gently remove the pill without damaging the fibers underneath. The professional would carefully go over the rug to ensure the pilling is removed evenly, leaving the wool in good condition.

·        Deep Cleaning: After shaving off the pilling, the rug would undergo a deep cleaning to remove any remaining loose fibers and dirt. This would also help restore the softness of the wool.

Additional Steps in the Restoration Process:

·        Deep Cleaning: Once the repairs are done, the rug would be carefully cleaned using appropriate techniques for Persian rugs. This would likely involve hand-washing the rug with a gentle, wool-safe detergent to remove dirt, oils, and any debris, followed by rinsing and drying.

·        Final Inspection: After repairs, the rug would undergo a final inspection to ensure that all issues (moth damage, wear, pilling, etc.) have been properly addressed. Any minor touch-ups or final adjustments would be made.

Jafri Rug restoration will do the following step by step:

1. Inspection & Documentation

• Rug is inspected under strong lighting for:

  • Damage (holes, tears, moth damage)

  • Fiber content (wool, silk, cotton)

  • Color stability (testing for dye bleeding)

  • Odors (e.g. pet urine, mildew)

• Measurements are recorded; before photos are taken.

2. Dry Soil Removal (Dusting)

• Rug is flipped and vibrated or beaten using a rug dusting machine or compressed air.

• This step removes up to 80% of dry dirt and sand embedded in the foundation.

• Avoided by carpet steamers but critical for longevity.

🧠 Fact: Persian rugs can trap several pounds of grit, which can shred fibers if not dusted out before washing.

3. Colorfastness Testing

• Specialists blot dyes with water and pH-neutral cleaning agents to check for bleeding.

• If unstable, dye-locking agents are applied or rug is washed carefully in cold water.

4. Pre-Soaking / Odor Treatment

• Rugs with pet urine or mildew are submerged in odor-neutralizing solutions.

• Enzyme-based treatments may be used to break down organic stains before shampooing.

5. Hand Washing or Submersion Wash

• Traditional Persian-style hand washing uses:

  • Wool-safe, pH-balanced shampoo

  • Gentle brushing following the nap of the pile

  • Repeated rinsing with soft water

• For extremely dirty rugs, the entire rug may be submerged and agitated in a wash pool.

🚫 Avoid high-pressure or in-home “steam cleaning”—it can cause shrinkage, color bleeding, or structural damage.

6. Rinsing & Water Extraction

• Rinsed thoroughly using flowing water or soft spray wands.

• Excess water is extracted via a centrifuge wringer or by rolling and pressing.

7. Drying

• Rugs are hung in a climate-controlled room or flat-dried on drying beds with airflow.

• Wool rugs may take 24–48 hours to fully dry.

8. Final Grooming & Inspection

• Pile is brushed to align the nap and restore softness.

• Fringe is combed, dried, and sometimes whitened.

• Final inspection checks for odors, stains, stiffness, or repair needs.

The first image shows how this rug has been left in a very poor condition. The rug is an example of an antique Persian circa 1900 rug. This rug requires enormous attention to the following areas:

-Reweaving worn areas where warp and weft is showing

-Refringing as the fringe is torn off

-Rebinding as the binding is unraveling

-Vegetable dyes are fading

-Field of the rug is also showing unevenness in the wool pile

The second image shows the full restoration process where Jafri Rug restoration fully repaired this rug to its original condition while maintaining the antiquity of the rug by doing the following:

-Reweaving all worn areas to bring back this rug's dye lots are amazing and look vibrant

- Brush the rug with oil and dye in areas where the wool was not worn and distressed

-Matching the wool so that it blends perfectly within the field of the rug

This is a classic Persian Tabriz that should be preserved