Oriental & Area Rug Cleaning and Repair in Alplaus, NY

Repairing Damaged Areas:

Reweaving is required for areas with wear, holes, or fraying. Skilled artisans will carefully match the original design and weave to restore damaged sections without altering the original look.

Edge Repairs: The edges need reinforcement to prevent fraying and maintain their structure.

Padding should be cut to protect the warp and weft

1. Inspection and Assessment
The restoration process at Jafri Rugs begins with a thorough inspection to evaluate the extent of damage. This includes identifying areas of wear, loose or unraveling threads, faded colors, and any holes or tears. Special care is taken to preserve the rug’s original design and the integrity of its stitching.

2. Pre-Restoration Cleaning
Before restoration work begins, the rug is carefully cleaned to remove accumulated dirt, dust, and stains. This ensures the restoration is performed on a clean surface and helps uncover areas that may require additional attention during the process.

3. Reweaving Damaged Sections
If the rug has missing or damaged stitches, skilled artisans meticulously reweave the affected areas. Original patterns and colors are closely matched so the repaired sections blend seamlessly with the rest of the rug, requiring a high level of craftsmanship.

4. Fringe and Edge Repair
The fringe of a rug often experiences wear over time. Frayed or missing fringe can be repaired or replaced by hand to match the original design and materials.
Additionally, rug edges that have begun to unravel are reinforced or re-bound through careful re-stitching or the use of similar materials to secure and protect the edges.

5. Dyeing and Color Restoration
Over time, exposure to sunlight, foot traffic, or improper cleaning can cause rug colors to fade. Restoration specialists use professional, colorfast dyes to restore the rug’s original hues.
Precise color matching is essential and is typically done by hand to ensure a seamless and natural appearance.

6. Final Inspection
Once all restoration work is complete, a final inspection is performed to ensure the rug has been fully restored. The rug is examined for any overlooked areas, color inconsistencies, or stitching issues before it is returned.

Jafri Rug restoration will do the following:

1. Pre-Inspection & Fiber Testing

A professional will:

• Confirm the rug is 100% jute or a jute blend

• Check for color bleeding, existing water stains, shrinkage, or backing issues

• Identify stains (oil, food, pet, moisture)

2. Dry Soil Removal (Most Important Step)

• High-powered vacuuming on both sides

• No beater bars (they break jute fibers)

• Removes grit that causes premature wear

3. Low-Moisture or Dry Cleaning Method

Professionals NEVER steam clean or soak jute rugs.

Accepted methods include:

✔ Dry Compound Cleaning

• Absorbent cleaning powder is worked into fibers

• Powder binds dirt and oils

• Thorough vacuum removal

Best for:

• Routine maintenance

• Light soil

✔ Controlled Low-Moisture Cleaning

• Very light mist (not wet)

• Neutral or slightly acidic cleaner

• Hand-agitated with soft brush

• Immediate extraction or towel blotting

Used only when necessary for stains.

4. Spot & Stain Treatment (Carefully)

Professionals:

• Treat stains individually

• Use solvent-based cleaners for oil/grease

• Avoid alkaline or bleach products

• Never oversaturate

5. Rapid, Controlled Drying

• Air movers placed at angles

• Flat drying to prevent warping

• No heat, no sun exposure

Drying must occur within a few hours to prevent:

• Browning

• Mildew

• Fiber distortion

6. Final Grooming & Inspection

• Fibers realigned

• Texture evened out

• Final inspection for odor or residue