Oriental & Area Rug Cleaning and Repair in East Glenville

The first picture shows the newly preserved rug where the vegetable dyes are coming thru and you can actually see the pronouncement of the design.

The second picture shows the newly added fringe.

As this is a classic Kerman rug from the mid-century it is densely knotted so the binding and fringe has to comport to the design and era of the rug.

In this instance Jafri Rug restoration used fringe implants that were of the mid-century so they were a little longer and New Zealand ivory wool was used to fix the edging of the rug.

Look at the below detailed process of Jafri Rug restoration:

Pre-Repair Cleaning

• A deep cleaning is performed before repairs to remove dirt, oils, and debris that interfere with repair work.
• Includes:
• Dusting (front and back)
• Gentle hand washing with pH-neutral detergents so as not to erode the fibers of the rug
• Rinsing and drying in a temperature-controlled environment

Structural Repairs

These are the most critical to maintain rug integrity:

a. Edge Repair (Overcasting or Binding)

• Rewrap or rebind fraying edges to prevent unraveling.
• Uses matching wool or cotton thread.
• Restores tension and keeps the weft and warp from separating.

b. Fringe Repair or Replacement

• Stabilizes or reconstructs the fringe (often the warp threads).
• May involve:
• Tying off loose fringe
• Sewing in new fringe sections
• Weaving new fringes into the foundation

c. Hole or Tear Repair

• Small holes: patched and reinforced from the back.
• Larger holes or tears: require reweaving the foundation (warp and weft), then tying new knots to match the original pattern.

4. Pile Reweaving / Pattern Reconstruction

• Rebuilds worn or missing areas by hand-knotting new wool or silk into the structure.
• Requires:
• Color-matching wool (often hand-dyed)
• Matching the knot density, knot type (Turkish or Persian), and pattern
• Done by experienced weavers to ensure seamless blending with the original design.

5. Color Restoration

• In areas where colors have faded or bled, restorers may:
• Touch up color with textile-safe dyes where there is already wool shown in the pile but requires blending of color for consistency in the rug’s colors
• Avoid painting, which can damage fibers over time

 6. Shearing & Grooming

• After repairs, the pile is carefully sheared to match surrounding areas.
• Helps ensure a consistent pile height and finish.
• Brushing aligns the nap and improves visual consistency.

 7. Blocking & Reshaping

• If the rug is warped or misshapen:
• It’s dampened and laid flat under weight or pinned.
• Dried under tension to restore its original shape and prevent buckling.

8. Final Cleaning & Inspection

• A final surface clean removes any dust or fibers from the repair.
• Inspection ensures:
• Seamless repairs
• Color and texture matches
• Edges are secure and the rug lies flat

Repairing Damaged Areas:

Reweaving is required for areas with wear, holes, or fraying. Skilled artisans will carefully match the original design and weave to restore damaged sections without altering the original look.

Edge Repairs: The edges need reinforcement to prevent fraying and maintain their structure.

Padding should be cut to protect the warp and weft

1. Inspection and Assessment
The restoration process at Jafri Rugs begins with a thorough inspection to evaluate the extent of damage. This includes identifying areas of wear, loose or unraveling threads, faded colors, and any holes or tears. Special care is taken to preserve the rug’s original design and the integrity of its stitching.

2. Pre-Restoration Cleaning
Before restoration work begins, the rug is carefully cleaned to remove accumulated dirt, dust, and stains. This ensures the restoration is performed on a clean surface and helps uncover areas that may require additional attention during the process.

3. Reweaving Damaged Sections
If the rug has missing or damaged stitches, skilled artisans meticulously reweave the affected areas. Original patterns and colors are closely matched so the repaired sections blend seamlessly with the rest of the rug, requiring a high level of craftsmanship.

4. Fringe and Edge Repair
The fringe of a rug often experiences wear over time. Frayed or missing fringe can be repaired or replaced by hand to match the original design and materials.
Additionally, rug edges that have begun to unravel are reinforced or re-bound through careful re-stitching or the use of similar materials to secure and protect the edges.

5. Dyeing and Color Restoration
Over time, exposure to sunlight, foot traffic, or improper cleaning can cause rug colors to fade. Restoration specialists use professional, colorfast dyes to restore the rug’s original hues.
Precise color matching is essential and is typically done by hand to ensure a seamless and natural appearance.

6. Final Inspection
Once all restoration work is complete, a final inspection is performed to ensure the rug has been fully restored. The rug is examined for any overlooked areas, color inconsistencies, or stitching issues before it is returned.